🎉 Celebrate with 10% OFF on All Products! Use Code: GFEX10 Or Buy Any 2+ Items for 30% OFF with Code: GFEX30!

Gravity Forms Exhibitor & Booth Booking Setup Guide

Updated 13 min read Gravity Forms Integrations A–Z
On this page
  1. What you need
  2. Install and activate
  3. Who can use the organiser screens
  4. Build the floor plan
  5. Set up the booking form
  6. What exhibitors see
  7. Sponsor and extra packages
  8. Apply now, approve later
  9. The exhibitor portal
  10. Deadlines and reminders
  11. The public exhibitor directory
  12. The organiser screen
  13. How it differs from other GravityExtra add-ons and Gravity Forms product fields
  14. Settings
  15. Uninstalling
  16. Troubleshooting

The Gravity Forms Exhibitor & Booth Booking add-on lets you sell exhibitor booths for a trade show, fair, conference or market from your own WordPress site. You upload a plan of each hall, draw the booths on it, and add a Booth Picker field to a Gravity Forms form. Exhibitors choose a free booth on the plan or in a list, the booth is held for them while they finish the form, and the booth price is added to the order so the payment add-on you already use can charge it. After booking, each exhibitor gets a private portal link to add the company profile, logo, staff badge names and documents. This guide covers installing the add-on, building the floor plan, setting up the booking form, packages, the “apply now, approve later” mode, the exhibitor portal, deadlines and reminders, the public directory, the organiser screen and the settings.

What you need

You need Gravity Forms 2.9 or newer and WordPress 6.5 or newer on PHP 7.4 or newer. For paid booths you also need a Gravity Forms payment add-on, set up the way you would for any product form. Everything else runs inside your WordPress site: the plan is your own image, there is no map or tile service, and the add-on makes no outside connection beyond checking gravityextra.com for your licence and plugin updates. E-mails to exhibitors go out through your normal WordPress mail setup.

Install and activate

  • Upload the add-on zip in Plugins → Add New → Upload Plugin and activate it.
  • Go to Forms → Settings → Exhibitor Booths, enter your GravityExtra licence key and press Activate License.
  • A new admin menu, Exhibitor Booths, opens the organiser screens. The add-on also creates a page called Exhibitor portal; leave it published, because the private links in your e-mails point to it.

Without an active licence the organiser screen only shows a note with a link to the licence settings, the Booth Picker field says that booking is not available, booths cannot be held, the portal shows that it is not available and the directory stays empty. Existing bookings and entries are kept.

Who can use the organiser screens

The organiser screens need the gexb_manage_booths capability. Administrators get it when the add-on is activated, and the add-on adds a role called Booth organiser that can log in, upload the plan images and manage booths, but cannot change the rest of the site or the Gravity Forms settings. Give that role to the events team. Users without the capability do not see the menu, and the screens, actions, document downloads and the CSV export answer with an “access denied” page.

Build the floor plan

Open Exhibitor Booths → Floor plans. Give the hall a name, for example “Main Hall”, choose the plan image (JPG, PNG, WebP or GIF) and press Save hall. Any plan works: an export from your venue’s drawing, a scan, or a simple image you made yourself. Aisles, walls, entrances, the café and the stage are simply part of the image; you only draw the booths you sell. Add as many halls as you need, such as a main hall, a garden pavilion and an outdoor area.

The floor plan editor: the hall plan image with booth rectangles drawn on it, and the table of booths with number, type, size, area, price and position
Drag on the plan to draw a booth, then fill in its number, size, type and price.

Below the hall details you see the plan. To draw a booth, press the mouse on one corner of the booth and drag to the opposite corner. A row appears in the table with the position filled in and the next booth number (after A1 comes A2, after B09 comes B10). For each booth fill in:

  • Number — what exhibitors and your team call it, such as A12 or G-3. Each number can be used once per hall.
  • Type — standard, corner or island. The type is shown to exhibitors and is used for the waitlist.
  • Size and area — for example “3 x 3 m” and 9 m².
  • Price — the booth price without packages. You can type it as 1200, 1,200.00 or 1.200,00.
  • X, Y, W, H — the position and size in percent of the image. Drawing fills them in; you can also type them, which is handy for lining up a row of booths exactly or for working with the keyboard only. The Add a booth button adds an empty row.

Click a booth on the plan to jump to its row. Press Save booths when you are done. The editor saves everything or nothing: if one row has no number, a number used twice, a price that is not a number or a rectangle that sticks out of the image, nothing is saved and the rows with a problem are marked. Booths that are booked or on hold cannot be deleted; cancel or move the booking first. Because positions are stored in percent of the image, the plan scales to any screen and you can replace the image with a sharper version later without redrawing.

Set up the booking form

Create a form with the fields you want from exhibitors, for example company name, contact person, e-mail, phone and website. Then add the Booth Picker field from the Pricing Fields group, and, if you sell sponsorships or extras, the Exhibitor Packages field. Open Form Settings → Exhibitor Booths and choose:

  • Booking mode — “Book and pay now” adds the booth price to the order total; “Apply now, approve later” takes no payment and reserves the booth until you decide.
  • Hold time — how many minutes a chosen booth stays reserved for the visitor while they finish the form (15 by default, up to 120).
  • Halls — which halls this form offers. Tick none to offer them all. This lets you run, for example, one paid form for the main hall and an application form for the garden pavilion.
  • Waitlist — when every booth of a type is taken, people can join the waitlist for that type instead.
  • Field mapping — which of your fields hold the company name, contact person, e-mail, phone and website. The add-on uses them for the exhibitor record, the e-mails and the portal.

For paid booths, add a Total field and set up your payment add-on’s feed on the same form as you normally would, with the payment amount set to the form total. The Total field updates live as exhibitors pick a booth and tick packages. The add-on adds the booth and each ticked package to the order as product lines, so they appear in the order summary, in the entry and in the amount your payment add-on charges.

What exhibitors see

The booking form: company details, the hall plan with free, held and booked booths, the chosen booth held for the visitor, the booth list, packages, the running order summary and the Total field
Exhibitors pick a booth on the plan or in the list; it is held for them while they finish.

The Booth Picker shows each hall’s plan with every booth coloured by its state: free, on hold, booked, or the visitor’s own choice. Below each plan is a list of the same booths with their number, size, area, type, price and state. The list is made of ordinary radio buttons with labels, so it works with a keyboard and a screen reader; the plan above it is a visual shortcut that ticks the same radio button. When a visitor picks a booth, the add-on holds it for them and says until what time. If somebody else is holding or has booked that booth, the visitor is told right away and can choose another. In “book and pay now” mode a short summary shows the booth, the ticked packages and the total.

When the form is submitted, the add-on checks the booth again on the server before your payment add-on runs. If two people try to book the same booth at the same moment, the database lets exactly one of them have it; the other sees “Sorry, booth A2 was just booked by someone else” and no payment is taken from them. Holds end on their own after the hold time, so a visitor who walks away does not block a booth.

Open Exhibitor Booths → Packages to add packages such as “Gold sponsor” (3 available), “Lanyard sponsor” (1 available), “Power socket” or “Extra table”. Each package has a name, a short description, a price, a quantity and an on / off switch. The Exhibitor Packages field lists the active packages with how many are left; when the last one is booked it shows as sold out and cannot be ticked. Package quantities are protected the same way as booths, one unit at a time, so the last Gold sponsorship cannot go to two companies. You can raise the quantity at any time; you can lower it only down to what is already booked or held.

Apply now, approve later

Many shows choose their exhibitors. In this mode the form takes no payment and adds no price to the order. The chosen booth is marked “awaiting approval” and nobody else can book it. The applicant gets an e-mail that the application was received. On the Booths or Exhibitors screen press Approve to confirm the booth; the exhibitor then gets the portal link by e-mail. Press Decline to free the booth again and send a short, polite e-mail. If you want approved exhibitors to pay, send them a payment request your usual way.

The exhibitor portal

The exhibitor portal: checklist with due items, company profile, staff badge names, directory opt-ins, logo and document uploads
Each exhibitor completes the profile, logo, badge names and documents from a private link.

Every confirmed exhibitor gets a private link to the Exhibitor portal page. The link carries a signature made with a secret key on your site, so it cannot be guessed or changed: a link with a changed signature, another exhibitor’s signature or no signature at all gets an “access denied” answer and shows nothing. In the portal the exhibitor can:

  • see a checklist of what is done and what is still missing, with the due dates;
  • edit the company profile: company name, contact person, phone, website and a description of up to 1,000 characters;
  • enter the staff badge names, one per line, up to the number you allow per booth;
  • upload a logo as JPG or PNG up to 2 MB. The add-on checks that the file really is an image of that type, re-draws it with the WordPress image editor at up to 600 pixels and stores the new file under a random name in a private folder. SVG files, renamed files and anything that is not a real image are refused;
  • upload the documents you ask for, such as public liability insurance or a risk assessment (PDF, Word, JPG or PNG up to 10 MB). They are stored in the same private folder and only sent to the exhibitor through the signed link or to your team;
  • choose what the public directory may show.

The portal page is never cached or indexed by search engines and sends no referrer to other sites. Keep the links private; anyone with a link can edit that exhibitor’s details. The Exhibitors screen shows each exhibitor’s current link if you need to send it again.

Deadlines and reminders

In Forms → Settings → Exhibitor Booths set the due dates for the profile and logo, the staff badge names and the documents, and the reminder days, for example “14, 3” for two weeks and three days before each date. Once an hour the add-on looks at every confirmed exhibitor. If something is still missing when a reminder point is reached, the exhibitor gets one e-mail that lists only the missing items with their due dates and the portal link. Each reminder point is sent once, and an exhibitor who has everything in place gets nothing. Applicants, declined or cancelled exhibitors and people on the waitlist get no reminders.

The public exhibitor directory

The public exhibitor directory: the hall plan with booked booths and the names of listed exhibitors, and exhibitor cards with logo, booth and website
The directory shows only the companies and details each exhibitor chose to share.

Add the Exhibitor directory block, or the shortcode [gravityextra_exhibitor_directory], to any page. It shows the hall plans with booked booths and a card for each listed exhibitor. Nothing is public by default: an exhibitor appears only after ticking “List my company name and booth number in the directory” in the portal, and the logo, description and website appear only when each of them is ticked too. The contact person, e-mail address, phone number and staff names are never shown. Booked booths of exhibitors who are not listed simply show as booked, without a name. Shortcode options: hall="2" shows one hall, plan="0" hides the plans and list="0" hides the cards.

The organiser screen

Exhibitor Booths → Booths shows counts of free, held, booked, awaiting and blocked booths and a grid of every booth with its hall, type, size, price, state and exhibitor. From each row you can:

  • Move a booking to another free booth. The entry is updated and the exhibitor gets an e-mail with the new booth.
  • Cancel a booking. The booth and its packages become free again and the exhibitor is told by e-mail.
  • Release hold on a booth that a visitor is holding.
  • Block a free booth to keep it off sale (for example for the organiser’s own stand) and unblock it later.
  • Approve or Decline an application.

The Exhibitors tab shows each exhibitor’s booth, state and what is still missing, with the profile, logo, staff names, packages, documents, directory choices and portal link in a details panel. The Waitlist tab lists the people waiting for each booth type, oldest first, with how many booths of that type are free now; E-mail: a booth is free tells the person and links the booking page. Export CSV downloads every booth with its exhibitor, packages, staff names and document count; values that a spreadsheet would run as a formula are made safe. If an entry is moved to the trash or a payment fails, the booth is freed automatically.

How it differs from other GravityExtra add-ons and Gravity Forms product fields

  • Seat Picker lets attendees choose seats in rows or at round tables, one seat per person, from a seating chart you build from rows and sections. Exhibitor & Booth Booking sells whole booths that you draw on your own hall plan image, with booth types, sizes and individual prices, packages and an exhibitor portal for the company behind each booking.
  • Event Tickets sells admission tickets to attendees. Exhibitor & Booth Booking is for the companies who exhibit at the event, not the visitors.
  • Stamp Passport lets visitors collect stamps at booths during the event. It works well alongside this add-on, but it does not sell or manage booths.
  • Image Hotspot / Annotation puts clickable hotspots on an image, including floor plans, to show information. It has no booking, holds, prices, double-booking protection or exhibitor records.
  • Gravity Forms product fields can sell a list of products with quantities, but they know nothing about a plan, about which booth is already taken, or about holding a booth while someone pays. This add-on adds those parts and still hands the price to the Gravity Forms order, so payment works the way you already know.

Settings

  • Show name in e-mails — for example “Lakeshore Home & Garden Expo 2027”. Empty means the site title.
  • Reply-to e-mail — exhibitors who answer an e-mail reach this address.
  • Staff badges per booth — the most names an exhibitor can enter (4 by default).
  • Documents exhibitors must upload — one per line.
  • Due dates and reminder days — see Deadlines and reminders.

Uninstalling

Uninstalling the add-on from the Gravity Forms settings, or deleting it from the Plugins screen, removes its tables (halls, booths, packages and exhibitors), its settings, the private folder with logos and documents, the Exhibitor portal page, the Booth organiser role, the capability and its scheduled reminders. Gravity Forms entries stay, and the hall plan images stay in your media library. Export the CSV first if you want to keep a record.

Troubleshooting

  • An exhibitor says the link is not valid — the link was probably cut off or changed by their mail program. Copy the current link from the Exhibitors tab and send it again.
  • A booth shows “on hold” although nobody is booking — a visitor chose it and left. The hold ends by itself after the hold time, or press Release hold.
  • How the total is worked out — a Gravity Forms Total field on the form shows the booth and the ticked packages live, and the Booth Picker also shows a short summary. The number in the browser is only a preview: when the form is submitted, the server prices the booth and packages itself, and Gravity Forms refuses a submission whose total was changed in the browser.
  • Your server runs nginx — nginx ignores .htaccess files. Stored files already have random names, but you can also add a rule that denies web access to /wp-content/uploads/gfexhibitorbooths-private/.
  • E-mails do not arrive — check that your site can send e-mail (for example with an SMTP plugin) and look in the exhibitor’s spam folder.

Still need help?

Our support team answers tickets every day, usually within a few hours.

0
0
Your Cart
Your cart is emptyReturn to Shop
🔥 FREQUENTLY BOUGHT TOGETHER
Complete Combo & Save 40%!
ITEM IN YOUR CART
Gravity Forms Klaviyo Add-on
$39.00/yr
+
🎁 RECOMMENDED ADD-ON SAVE 40% OFF
Original Price: $39.00/yr
Bundle Special Price: $23.40/yr