🎉 Celebrate with 10% OFF on All Products! Use Code: GFEX10 Or Buy Any 2+ Items for 30% OFF with Code: GFEX30!
Guides & Tutorials October 31, 2026

How to Set Up QR Code Table Ordering With Gravity Forms (Kitchen Display Included)

GravityExtra
How to Set Up QR Code Table Ordering With Gravity Forms (Kitchen Display Included)

Ordering at the table with a QR code has become normal in cafés, bars and restaurants. Guests sit down, scan a small card with their phone camera, choose from the menu and carry on talking, while the order goes straight to the people who prepare it. For a busy venue that means fewer trips to the table, fewer mistakes when orders are passed along by hand, and staff who can spend their time on food, drinks and hospitality instead of writing on notepads.

If your venue’s website already runs on WordPress and Gravity Forms, you do not need a separate ordering platform with its own menu editor, its own fees and its own guest data. Your order form is a Gravity Forms form, your entries stay on your own site, and the payment add-on you already trust can take online payments. This guide explains how QR table ordering works, what a good setup needs, where it usually goes wrong, and how to run it from Gravity Forms with the Gravity Forms QR Table Ordering & Kitchen Display add-on.

How QR table ordering works

The idea is simple. Each table has a card with a QR code. The code opens an order page on the guest’s phone. The guest chooses items and options, adds a note, and sends the order. The order appears on a screen where it is prepared, and the guest can see when it is being prepared, when it is ready and when it is served.

Behind that simple idea there are five parts that all need to work together:

  • Table codes that tell your site which table an order comes from.
  • An order form that works well on a phone and knows the table.
  • A kitchen display where staff see new orders at once and move them through their stages.
  • A guest page that shows the order and its progress.
  • Payment, either at the counter or online, without the order getting lost on the way.

Most problems with table ordering come from the gaps between these parts: a table number the guest can change, an order that sits unnoticed in an inbox, a guest who does not know whether the order arrived, or an order that reaches the kitchen before the payment has gone through.

Why a plain form with a “table number” field is not enough

Many venues start with a simple form: the menu as product fields and a box where the guest types the table number. It is a reasonable first try, but it shows its limits on the first busy evening.

  • Guests type the wrong table. Some do not know their number, some guess, and some type the number of the table they sat at last week. Food goes to the wrong place.
  • Anyone can order for any table. A typed number cannot be checked. A form that is open to the whole internet can receive orders for tables that do not exist.
  • The kitchen only sees e-mails. An inbox is not a kitchen display. There is no way to see which orders are waiting, which are being prepared and which are ready, and nothing tells the team that a new order has arrived.
  • The guest is left guessing. After pressing Send, the guest sees a thank-you message and nothing else. When the food takes a while, they wave at staff to ask whether the order arrived.
  • Payments and orders drift apart. If the guest pays online and the payment fails, the kitchen may already be cooking an order nobody paid for.

A table ordering setup fixes these by tying each order to a table that cannot be changed, by putting orders on a live board, and by letting the guest follow along.

Step 1: build your menu as a Gravity Forms order form

Gravity Forms already has everything a menu needs. Use a Product field for each item, usually as a Single Product with the quantity box switched on, so guests can order two flat whites in one go. Add Option fields for choices that change the item, such as milk, size or extra toppings, with a price where an option costs more. Add a Paragraph Text field for notes to the kitchen and a Total field so guests always see what they are ordering. Group the menu with section breaks for drinks, breakfast, lunch and cakes.

Finally, add a Single Line Text field called “Table”. The guest never types in it: the table ordering add-on fills it in from the QR code and locks it.

If you want the menu to look more like a menu, our Live Order Summary & Product Table add-on can show the products as a tidy order table with plus and minus buttons and a live total. It uses the same Gravity Forms product fields, so it works on the same order form.

The order page on a phone: the café name, Your table Table 4 on the Terrace, the locked Table field, products with quantity buttons, milk option, a note for the kitchen and the total
The order page on a guest’s phone, with the table locked.

Step 2: give every table a QR code it cannot fake

The QR code is the key to the whole setup. It should do more than open your menu: it should tell your site, in a way nobody can change, which table the order comes from.

The QR Table Ordering add-on gives every table a random code and signs it with a secret key that only your site knows. The QR code opens your order form on a clean mobile page with the table filled in and locked. When the order is sent, the server checks the signature again and compares the table field with the signed table. If someone edits the field, changes the link, uses an old card or sends the form without a code, the order is refused with a friendly message and no entry is created. Because the check happens before Gravity Forms hands the order to any payment add-on, a refused order is never charged.

Adding tables is quick: give a name, an area such as Terrace or Inside, the station that usually prepares the table’s orders, and the order form. A numbered range adds Table 1 to Table 12 in one go. The add-on prints table cards as a PDF, four per A4 page with cut lines, each with your venue name, the table, a large QR code and a short “Scan to order” instruction. The QR codes are drawn by the add-on itself, so no outside QR service is involved. If a card goes missing or is copied, one click makes a new code for that table and the old card stops working.

Step 3: put orders on a live kitchen board

An order that nobody notices is worse than no order at all. A kitchen display solves this by showing every open order in a place the team looks at all the time.

The kitchen board: New, Preparing, Ready and Served columns with order cards showing the order number, table, area, minutes since the order, items with options and stations, notes, payment labels and Start, Ready and Served buttons
New, Preparing, Ready and Served: every order in one view.

The board in the add-on is a full-screen page for a tablet or a kitchen screen. Orders sit in four columns: New, Preparing, Ready and Served. Each card shows the order number, the table and area, how many minutes ago the order arrived, every item with its quantity and options, and the guest’s note in a yellow box. Cards turn red when an order has waited more than fifteen minutes. A short chime plays when a new order arrives and the new card pulses, so nobody has to watch the screen constantly.

Staff move an order on with one tap (Start, Ready, Served) or by dragging the card to another column. A Back button undoes a step, and Cancel asks for confirmation before taking an order off the board. Every status change is noted on the Gravity Forms entry with the staff member’s name, which helps when a guest asks what happened to an order.

The board refreshes by asking your own site for changes every few seconds. There are no websockets, no outside realtime service and nothing to install on the kitchen tablet beyond a browser. Only logged-in staff with a role you choose can open it.

Stations: drinks to the bar, food to the kitchen

In most venues more than one team prepares an order. The barista makes the coffee and the kitchen makes the toast. With stations, each team sees only its part. You choose a station for each product field (Bar for drinks, Kitchen for food) and a default station for each table. On the board, the Station filter shows only that station’s items: the bar screen lists the flat whites of an order while the kitchen screen lists the avocado toast of the same order. An Area filter does the same for parts of the venue, for example to give the terrace team its own view.

Step 4: let guests follow their order

After ordering, the guest lands on a private status page. It shows the order number, the table, the items and the total, and four steps: Received, Preparing, Ready and Served. The page updates by itself as the kitchen moves the order along, so the guest knows the order arrived and can see when it is nearly there. When an order is cancelled, the page says so clearly and asks the guest to speak to a member of staff.

The status page can also offer a Call staff button. When the guest presses it, the order’s card on the board gets a bell and a yellow frame until a member of staff taps “On my way”. The button has a waiting time between calls and a limit per order, so it stays useful without becoming noise.

The link to the status page is signed like the table codes, so a guest cannot see someone else’s order by changing a number in the address. You can also send the link in a Gravity Forms notification with the merge tag {gfto_status_url}.

Step 5: decide how guests pay

Table ordering does not change who handles your money. There are two common ways to take payment, and the add-on supports both without any payment code of its own:

  • Pay at the counter. Orders go straight to the kitchen with a “Pay at counter” label. Staff can tap “Mark paid” on the card once the guest has paid, which only changes the label. This is the simplest setup and suits cafés where guests pay on the way out.
  • Pay online with your payment add-on. Add a feed of the Gravity Forms payment add-on you already use to the order form. When the payment is completed during the order, the card says “Paid online”. When the payment add-on sends the guest to a payment page, the order waits off the board until Gravity Forms marks the entry paid; then it appears with the chime. A failed or cancelled payment never reaches the kitchen.

Because the add-on only reads the payment status that Gravity Forms stores on the entry, refunds, receipts and payment records stay where they are today: in your payment add-on and in Gravity Forms.

How this differs from other order and QR tools

Our Live Order Summary & Product Table helps you build a clear order form, and our QR Code Generator makes QR codes for links and entries. Neither of them knows about tables or sends orders anywhere. QR Table Ordering & Kitchen Display fills exactly that gap: it ties each order to a signed table code, routes orders to a kitchen board with statuses and stations, and gives the guest a live status page. It works alongside the other two, on the Gravity Forms forms you already have.

Compared with a separate ordering platform, everything stays on your own WordPress site: your menu is a form you already know how to edit, your orders are Gravity Forms entries, and no outside service sits between your guests and your kitchen.

A checklist before your first service

  • Test the order form on a phone: every item, every option and the total.
  • Choose the station of each product and the default station of each table.
  • Print the table cards on card, cut them and put them in table stands.
  • Scan two or three cards and place a test order from each.
  • Open the kitchen board on the kitchen tablet, tap the Sound button once and check that you hear the chime on a new order.
  • Give kitchen staff their own logins with a role allowed on the board.
  • Write your allergy advice in the note under the order form; allergen and dietary information is your venue’s responsibility, so keep your menu and your team’s answers up to date.
  • Decide whether guests pay at the counter or online, and test one paid order if you use online payment.
  • At the end of the day, look at the daily summary and download the CSV for your records.

The daily summary

At the end of a service, the daily summary shows the number of orders and items, the order total, the cancelled orders, totals for each status, the best-selling items and a list of every order. A CSV export gives one row per order with the time, table, status, payment label, items, total and the minutes from the kitchen to ready, which makes it easy to spot slow times or popular dishes. Cancelled orders and orders still waiting for an online payment are left out of the day’s totals.

Privacy and performance

The add-on runs entirely on your own server. Its tables and orders are stored in your WordPress database, the guest’s answers stay in Gravity Forms entries, and it makes no outside HTTP request beyond checking gravityextra.com for your licence and updates. The guest pages are never cached or indexed and send no referrer, so private order links do not leak. The board and the guest page use small, light requests, and you choose how often they refresh. For every setting in detail, read the QR Table Ordering & Kitchen Display documentation.

Wrapping up

QR table ordering works best when the table cannot be changed, the kitchen sees every order the moment it arrives, the guest knows what is happening, and payment stays with the tools you already trust. With Gravity Forms and a few minutes of setup you can have all four: signed table cards, a locked order form, a live kitchen board with stations and a self-updating guest page. Ready to take your first order from the table? Get Gravity Forms QR Table Ordering & Kitchen Display.

0
0
Your Cart
Your cart is emptyReturn to Shop
🔥 FREQUENTLY BOUGHT TOGETHER
Complete Combo & Save 40%!
ITEM IN YOUR CART
Gravity Forms Klaviyo Add-on
$39.00/yr
+
🎁 RECOMMENDED ADD-ON SAVE 40% OFF
Original Price: $39.00/yr
Bundle Special Price: $23.40/yr