🎉 Celebrate with 10% OFF on All Products! Use Code: GFEX10 Or Buy Any 2+ Items for 30% OFF with Code: GFEX30!
Guides & Tutorials October 19, 2026

How to Add a Back-in-Stock Waitlist to WooCommerce (Double Opt-in, Batched Emails)

GravityExtra
How to Add a Back-in-Stock Waitlist to WooCommerce (Double Opt-in, Batched Emails)

A customer lands on your best-selling product, wants it, and finds a grey “Out of stock” label. A standard WooCommerce store gives that person nothing to do except leave. Most of them never come back, even when the product returns a week later.

A back-in-stock waitlist fixes this. The customer leaves an e-mail address, you keep the demand on record, and when the product is available again they get a short message with a link straight to it. This guide shows how to add a back-in-stock waitlist to WooCommerce: why it pays off, how double opt-in keeps your list clean, how batched e-mails protect your server and your stock, and how to read the numbers afterwards. The setup uses the WooCommerce Back in Stock Notifier & Waitlist Add-on.

Why a Waitlist Beats an “Out of Stock” Label

Sold-out products are not a failure; they are a signal. Somebody wanted to buy and could not. A waitlist captures that intent instead of throwing it away:

  • It recovers lost sales. Shoppers who asked to be told are far more likely to buy than someone who simply sees a product again by chance.
  • It measures real demand. Forty people waiting for one size is a clear instruction to re-order that size first.
  • It costs nothing to run. Once set up, there is no list to maintain and no e-mails to write by hand.
  • It builds a consented list. Every address on the waitlist belongs to a person who asked to hear from you about one specific product.

WooCommerce itself has no waitlist. You can hide sold-out products, allow backorders or put up a contact form, but none of these tells customers when the product is back, and none of them follows up for you.

What a Good Back-in-Stock Waitlist Needs

Before you pick a solution, check it against five requirements. A plain “notify me” form that stores addresses in a text field fails most of them.

  1. The form appears where the customer is stuck — under “Out of stock” on simple products, and on the specific sold-out size or colour of a variable product, not on the whole parent product.
  2. Addresses are confirmed — double opt-in, so typos and fake sign-ups never reach your list.
  3. E-mails go out automatically when stock returns, with no manual export and no copy-paste into a newsletter tool.
  4. Sending is controlled — a limited number per batch, so a restock of five units does not produce five hundred disappointed customers.
  5. You can see the results — how many signed up, confirmed, clicked and bought.

How to Add a Back-in-Stock Waitlist to WooCommerce, Step by Step

Step 1: Install the add-on

Upload the WooCommerce Back in Stock Notifier & Waitlist Add-on under Plugins > Add New > Upload Plugin, activate it and enter your licence key in WooCommerce > Waitlist & Pre-orders > Licence. The waitlist works straight away with sensible defaults, so you can already test it on a sold-out product.

Step 2: See the waitlist form on a sold-out product

Open any product that is out of stock. Under the “Out of stock” message the shopper sees a short form: a line such as “Sold out, get an e-mail when it is back”, an e-mail field and a Notify me button. Logged-in customers do not need to type anything, because their account e-mail is used. The form works in classic and block themes alike.

{{ALT:woo-bis-waitlist.png}}
The waitlist form on a sold-out product.

On variable products the form follows the selection. When a customer picks a sold-out size, the form appears for that variation; pick an available one and the normal Add to cart button returns. Customers waiting for the large blue shirt are therefore never mixed up with customers waiting for the small red one.

If you prefer to place the form yourself, for example inside a page builder layout, you can use the shortcode [ge_waitlist] where the form should appear. Most stores never need it.

Step 3: Understand the double opt-in

When a guest submits the form, the add-on does not add them to the list immediately. It sends one confirmation e-mail with a single button, and the sign-up becomes active only after that click. This is double opt-in, and it matters for three reasons:

  • Clean data. A mistyped address never gets a back-in-stock e-mail, so your sending reputation is not damaged by bounces.
  • No abuse. Nobody can sign someone else up and have your shop send them unwanted mail.
  • Clear consent. You have proof that the owner of the mailbox asked for this exact notification.

Logged-in customers who use their account address are trusted and added at once, and you can ask them to confirm as well. Sign-ups that are never confirmed are deleted after 14 days (adjustable), so abandoned requests do not pile up.

Step 4: Check the settings

In the Settings tab, review the texts of the form, the confirmation message and the e-mails. Choose whether double opt-in is on (it is by default for guests), and set the batch size and the pause between batches (more on that below). The defaults suit most shops.

Step 5: Restock the product

This is the step where the waitlist earns its place, and it needs nothing from you except doing what you do anyway: update the stock. The moment the product is back in stock, whether you changed the quantity by hand, imported it from a spreadsheet or received it through a supplier sync, the waitlist notices and starts sending. Each confirmed customer gets one e-mail with the product name, its image and a button that goes straight to the product page.

Why Batched E-mails Matter

The obvious way to build a waitlist is to send every e-mail the second stock returns. It is also the wrong way, for two reasons.

First, your stock is limited. If ten units come back and two hundred people are waiting, a blast to all two hundred creates a race. Eighty percent of the recipients click, find the product sold out again and feel worse than before. Batches send a limited number of e-mails at a time, in sign-up order, so the people who asked first hear first.

Second, your server and your mail provider have limits. Hundreds of messages at once can hit rate limits on shared hosting, land in spam folders or slow your store down. Spreading the sending over several short runs keeps the shop fast and the deliverability high.

The add-on handles this for you with a background queue. The defaults are 25 e-mails per batch with a 60-second pause between batches; change both in the settings, and the rest happens by itself. If the product sells out again halfway through, sending stops, and everybody who has not been e-mailed yet keeps their place on the list for the next restock. Nobody is notified about a product that is not there.

Manage the List and Export It as CSV

The Waitlist tab of the add-on lists every sign-up with its product, variation, e-mail, status and date, so you always know who is waiting for what.

The CSV export turns the same list into a file with one click. That is useful in several ways:

  • Purchasing decisions. Sort by product to see which sold-out items have the longest queues and send that sheet to your supplier.
  • Reporting. Share the numbers with a business partner or add them to your monthly report.
  • Backups and migration. Keep your own copy of the list, independent of the website.

With double opt-in on, every address in the export is confirmed and tied to a specific product, not a pile of unchecked e-mails. Respect what people signed up for, though: they asked to hear about one product coming back, not to join a newsletter.

Read the Analytics

The Analytics tab follows each sign-up from start to finish: signups, confirmed, e-mailed, clicked and purchased, plus the revenue that came from the waitlist and a list of top products, for 7, 30 or 90 days, 12 months or all time. This is where a waitlist stops being a convenience and starts being a business tool.

{{ALT:woo-bis-analytics.png}}
From signup to purchase, in one view.

Look at these numbers in particular:

  • Confirmation rate. If many people sign up but few confirm, the confirmation e-mail may be going to spam or the wording may be unclear.
  • Click rate. Low clicks suggest that the e-mail subject or the delay between sign-up and restock is too long.
  • Purchase rate and revenue. This shows what a restock is really worth and which products deserve a bigger order next time.
  • Top products. The items with the longest waiting lists are the ones you should never let run out.

Practical Tips for a Waitlist That Converts

  • Show the form without friction. One field and one button. Every extra question lowers sign-ups.
  • Restock in time. Waiting customers lose interest. The sooner the e-mail follows the sign-up, the higher the purchase rate.
  • Match the batch to your stock. If you receive only a few units, a small batch lets you see how fast they go before the next group is e-mailed.
  • Write a clear subject. “{product} is back in stock” beats any clever line.
  • Check the numbers monthly. Use the analytics to decide what to re-order, and the CSV to share it with whoever buys for you.
  • Protect your reputation. Keep double opt-in switched on. A smaller, confirmed list always outperforms a larger, unchecked one.

One More Feature in Version 2.0: Pre-Orders

Version 2.0 of the add-on also lets you mark a product as a pre-order with an available-on date, so customers can reserve it before it arrives. It is a simple extra for stores that want to cover both sold-out and not-yet-available items with one plugin. If pre-orders are a main part of your business, with payment options, release rules and limits as the focus, take a look at the dedicated WooCommerce Pre-Order add-on instead.

Win Back the Sales You Lose to “Out of Stock”

A waitlist form with double opt-in, batched back-in-stock e-mails, CSV export and analytics — for every sold-out product and variation.

Frequently Asked Questions

Does the waitlist work with variable products?

Yes. The form appears for the specific sold-out variation, and each customer is notified only when the variation they chose is back in stock.

Do guests need an account?

No. Guests enter an e-mail address and confirm it with one click. Logged-in customers who use their account address are added at once.

Does it work with the Cart and Checkout blocks and with HPOS?

Yes. The add-on works with block and classic themes, the Cart and Checkout blocks and High-Performance Order Storage, on or off.

How many e-mails does a customer receive?

One confirmation e-mail after the sign-up (if double opt-in applies) and one back-in-stock e-mail when the product returns. There are no follow-up campaigns.

What happens if a product sells out again while e-mails are being sent?

Sending stops. Everyone who has not yet been e-mailed stays on the waitlist and is notified at the next restock.

Can I export the waitlist?

Yes. The waitlist admin has a CSV export of the sign-ups, and the file is safe to open in a spreadsheet. The export needs an active licence.

I already use version 1.0 of the add-on. Do I need to set it up again?

No. Version 2.0 keeps your settings and licence key. Upload the new version and activate it; if the old copy is still installed in a different folder, 2.0 switches it off for you.

0
0
Your Cart
Your cart is emptyReturn to Shop
🔥 FREQUENTLY BOUGHT TOGETHER
Complete Combo & Save 40%!
ITEM IN YOUR CART
Gravity Forms Klaviyo Add-on
$39.00/yr
+
🎁 RECOMMENDED ADD-ON SAVE 40% OFF
Original Price: $39.00/yr
Bundle Special Price: $23.40/yr